How can we help you?

Power Cycle Digital Cable Equipment

 

Introduction

Resolution Steps

 

 

PYXIX (eStream4K) - IPTV

    1. From Home left arrow to Menu, go to Settings then Device Settings, under General Settings choose Device Preferences

    2. Go to About and choose Restart, the box will then restart

            or

    1. Unplug the power cable in the back of the device

    2. Wait 10 seconds

    3. Plug the power cable back into the device

 

ANDSTRM (eStream4K) - IPTV

    1. From Home left arrow to Menu, go to Settings then Device Settings, under General Settings choose Device Preferences

    2. Go to About and choose Restart, the box will then restart

            or

    1. Power off turning the switch in the back of the device (not the button in front*) to the Off position

    2. Wait 10 seconds

    3. Turn the switch back to the On position

            or

    1. Unplug the power cable in the back of the device

    2. Wait 10 seconds

    3. Plug the power cable back into the device


    *Please Note: The button in the front will only put the device in standby mode, it will not power it off

 

DCH3416, DCH6200, DCH6416, DCT6416, DCT3416, DCT6412, DCT6208, DCX3400

    1. Press Power on the converter for 5 seconds, until the box turns off, then on again

    2. Wait for the clock to switch from 12:00 to the current time

 

DCX700, DCX3200, DCH3200, DCT6200, DCT5100, DCX525E

    1. Power off your television and converter

    2. Unplug the converter from the power and wait 30 seconds

    3. Plug the converter back in, then turn converter back on

    4. Power on your television

 

DCH70, DCT700

    1. Power off your television and converter

    2. Unplug the converter from it's power source (electrical outlet, power strip, etc.) and wait 30 seconds

      • Do not unplug the adapter from the back of the converter; the AC adapter must be unplugged from its power source

    3. Plug converter back in, then turn on the converter

    4. Power on your television

 

Cisco/Scientific Atlanta HD boxes

    On the Converter:

      1. Press the Vol +, Vol -, and Info buttons simultaneously, then release

      2. Wait until the time reappears on the box before taking the next step

     

    On the remote:

      1. On a non-interactive channel, like channel 2, hold down Pause until a small green light (not the power light) appears on the box

      2. Press Page Down once, then Stop 3 times

      3. The box should read r-02; after 1-2 min the box will restart

        Note: If neither of these methods work, please see the All other Models / Universal Power Cycle section below

 

TiVo (All models)

 

All other Models / Universal Power Cycle

     
    1. Power off the television and converter

    2. Unplug the converter from it's power source, wait 30 seconds, then plug converter back in

    3. Power on the converter, then the television

 

Internal Information

Commercial Agent Steps

Financial Agent Steps

Management Steps

Related Articles