800-746-4726

RCN Knowledge Center Customer Center Contact Us


Introduction

 

To Reset your TiVo remote, follow the steps below for your TiVo box

 

Resolution Steps




Series 4 TiVos

    1. Cover the top of the TiVo remote with your hand so that the IR signal is blocked

    2. Press the TiVo button and TV Power button together until remote light turns on

    3. Press Thumbs Down 3 times, then press Enter

    4. The light will blink 3 times and go out. If it doesn't repeat steps above

      • Note: Press Clear on the remote at any time to start the process again
 

Series 5 TiVos

    1. Cover the top of the TiVo remote with your hand so that the IR signal is blocked

    2. Press the TiVo button and TV Power button together until remote light turns on

    3. Press Thumbs Down 3 times, then press Enter

    4. The light will blink 3 times and go out

      • If it doesn't repeat steps above

        • Note: Press Clear on the remote at any time to start the process again

      • If you would like to place the remote in RF mode (through walls, around corners) follow the steps of your particular TiVo remote (see Remote Control manuals)
 

Series 5 TiVos with Experience 4

    1. Press the TiVo button and TV Power button together until remote light turns solid red

    2. Press Thumbs Down 3 times, then press Enter

    3. The light will blink 3 times and go out; press any directional key; it will automatically re-pair in Bluetooth

      • If this does not work

        1. Go to TiVo Central | left arrow to Menu | Setting | Remote, CableCard & Devices | Remote Setup | Remote Control Pairing

        2. Press the TiVo and Back button

 

If all of the above does not work

    1. Press and hold TiVo + C button until the red light blinks three times (this puts the remote into IR mode)

    2. Press Live TV

    3. Press Clear, Enter, Clear, 221, Clear

    4. Go to TiVo Central | left arrow to Menu | Setting | Remote, CableCard & Devices | Remote Setup | Remote Control Pairing

    5. Press and hold the TiVo + Back button until the light is solid red

    6. Release the buttons
 

Additional Information
Commercial Agent Steps
Financial Agent Steps
Management Steps
Share
Subscribe
Enter your email address to receive a notification when the article is updated
Email Address
Subscribe
Unsubscribe
Share
To
Subject
Message
Send

Was this article helpful?
Thank you for your feedback